AUTOMATIC REBAR BENDING MACHINE (DOUBLE BENDER) | TWB-40SNⅡ

･ TWB-40SNII is suitable for bending single and double anchors ranging from D16 to D38.
*It is also possible to bend double anchors of D38-SD390. (Yield point: 390–510 N/mm², tensile strength: ≥560 N/mm²)
･ The material is automatically supplied and the finished products can be discharged by the lifts.
･ One operator is enough to bend long lengths of rebar.
･ Two kinds of angles can be set using the dial-type setting.
･ Large radius machining is possible (ø250, 300, 400/500, 600).